106646
18” High Velocity Floor Fan
eUser’s Guide
IMPORTER:
COMERCIALIZADORA MEXICO AMERICANA S.de R.L. de C.V.
NEXTENGO NO. 78
COLONIA SANTA CRUZ ACAYUCAN
DELEGACION AZCAPOTZALCO
MEXICO D.F. C.P. 02770
TELEFONO (5) 328-3500
RFC: CMA9109119L0
Model 106646
Energy Consumption: 192 W
Operating Frequency: 60 Hz
Voltage: 120 V~
For product service, call customer service at 368-01-05
Item Stock Number: UPC:
106646
681131066464
READ AND SAVE THESE INSTRUCTIONS
WARNING:
CAUTION
a
RISK OF ELECTRIC SHOCK
Important Safety Instructions
DO NOT OPEN
To prevent fire or electri-
cal shock hazard, do not
expose this product to
rain or moisture.
CAUTION: TO REDUCE THE
RISK OF ELECTRIC SHOCK,
DO NOT REMOVE MOTOR
COVER (OR BACK). NO
USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING
TO QUALIFIED SERVICE
PERSONNEL.
THE
LIGHTNING
THE EXCLAMATION
1.Never insert fingers, pencils, or other foreign objects through
the grill.
FLASH AND ARROW-
HEAD WITHIN THE
POINT WITHIN THE
TRIANGLE IS
WARNING SIGN
ALERTING YOU OF
A
TRIANGLE IS
WARNING SIGN
ALERTING YOU OF
A
I
M
P
O
R
T
A
N
T
2.Disconnect fan when moving it from one location to another.
3.Be sure that the fan is on a stable surface when operating to
avoid the chance of it overturning.
"
D
A
N
G
E
R
O
U
S
I N S T R U C T I O N S
ACCOMPANYING
THE PRODUCT
VOLTAGE" INSIDE
THE PRODUCT.
SEE MARKING ON BOTTOM / BACK OF PRODUCT
4.Disconnect fan when removing housing parts for cleaning.
Reinstall parts before reconnecting to power supply.
5.DO NOT use this fan in a window. Rain may cause an
electrical hazard.
Operation
1. Plug the fan into any standard 120 V AC household outlet.
2. Using the rotary switch, set the desired fan speed.
3. Tilt fan to direct air flow.
WARNING: Use of a three-prong to two-prong
adapter is not recommended. Improper connection
may create the risk of electrocution.
Maintenance
Always Unplug Cord Before Using
6.WARNING: To reduce the risk of fire, electric shock or
personal injury:
a)Do not use this fan with any solid-state speed
control device.
Cleanning: IMPORTANT! DO NOT immerse electrical parts in
water! Parts may be cleaned with a mild detergent and water.
Wipe all other parts with a soft cloth moistened with water and
mild detergent only. DRY ALL PARTS COMPLETELY BEFORE
RECONNECTING TO POWER SOURCE.
Lubrication: Motor is permanently lubricated.
Store in a clean dry area when not in use.
b)Unplug fan before cleaning or servicing.
c)If you disassemble your fan, completely reassemble
before plugging into outlet.
d)Do not use this fan in a window. Rain may create an
electrical hazard.
7. The power cord is equipped with a three-prong grounded plug
that must be inserted into a matching receptacle. Under no
circumstances must the grounding prong be cut off the plug.
New 3/01 2085342
1
|